CFD Engineer, Data Centers - Remote (U.S.)

AECOM

Where
Remote (Arlington, VA, United States)
Pay
$16.10 an hour

Posted 21 days ago· Checked live at AECOM 1 hour ago

Stale: open 21 daysUp for more than two weeks. It may already be filled.

See how you score for this job

One sentence and your resume. We score it against what AECOM asks for, line by line.

See my score
Is this job still open?
Yes. We checked it live on AECOM's own hiring page 1 hour ago.
What is the job?
Job Description AECOM is seeking a hands-on Computational Fluid Dynamics (CFD) Engineer to join its Data Center team in our Buildings and Places (B+P) group in our Arlington, VA office; however, this position can be fully remote. This individual-contributor role is responsible for executing internal and external airflow, thermal, and equipment-discharge studies with minimal oversight.
What does it pay?
$16.10 an hour, as the posting states.
Our verdict
Stale. Up for more than two weeks. It may already be filled.

What the job is

Job Description

AECOM is seeking a hands-on Computational Fluid Dynamics (CFD) Engineer to join its Data Center team in our Buildings and Places (B+P) group in our Arlington, VA office; however, this position can be fully remote. This individual-contributor role is responsible for executing internal and external airflow, thermal, and equipment-discharge studies with minimal oversight.

Key Responsibilities

  • Own the full CFD study lifecycle: clarify the design question, define scope and acceptance criteria, develop the methodology, build geometry, generate the mesh, establish boundary conditions, solve, verify convergence, post-process results, and issue technical reports.
  • Perform internal data hall studies addressing rack inlet temperatures, airflow distribution, hot- and cold-aisle containment, bypass and recirculation, raised-floor or slab configurations, cooling-unit placement, rack density, failure modes, and capacity-expansion scenarios.
  • Perform external studies for cooling towers, chillers, dry coolers, generator and boiler exhaust, mechanical yards, relief air, outdoor-air intakes, heat rejection, plume behavior, short-circuiting, and thermal re-entrainment.
  • Conduct steady-state and transient analyses for cooling-system outages, equipment failures, load changes, control sequences, thermal ride-through, and other operating scenarios defined by the project team.
  • Develop defensible modeling assumptions using design documents, equipment data, controls narratives, weather data, commissioning information, and field measurements; identify data gaps and document their impact on conclusions.
  • Apply sound verification and validation practices, including mesh-sensitivity checks, mass and energy balance reviews, convergence assessment, comparison with hand calculations, and correlation to measured or monitoring data when available.
  • Evaluate results against project-specific criteria and relevant guidance, including ASHRAE TC 9.9 thermal guidance and applicable client, code, and industry requirements.
  • Translate findings into prioritized, actionable recommendations for equipment selection, airflow management, containment, intake/exhaust separation, controls, phasing, redundancy, and operational resilience.
  • Prepare concise, client-ready reports and visualizations that clearly communicate methodology, assumptions, scenarios, results, risks, limitations, and recommended next steps.
  • Present findings and coordinate directly with multidisciplinary project teams to resolve issues and confirm implementation of recommendations.
  • Contribute to standardized templates, modeling procedures, quality-control checklists, libraries, and lessons learned; support technical knowledge sharing and mentoring of less-experienced staff.

Minimum Qualifications

  • Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a closely related engineering discipline.
  • 6+ years of hands-on CFD experience, including direct application to data centers, mission-critical facilities, or similarly complex thermal-management environments.
  • Proficiency with at least one data-center or general-purpose CFD platform, such as Cadence 6SigmaDCX, Ansys Fluent, Ansys CFX, or OpenFOAM, and the ability to learn and apply project-required tools.
  • Strong fundamentals in fluid mechanics, heat transfer, thermodynamics, turbulence modeling, and HVAC system operation.
  • Experience modeling both internal environments, such as IT spaces and containment systems, and external environments, such as mechanical yards, cooling equipment, intakes, and exhaust discharges.
  • Working knowledge of data center cooling architectures, HVAC systems, redundancy concepts, controls and failure scenarios, and common thermal performance metrics.

Preferred Qualifications

  • Bachelor’s in Mechanical Engineering
  • Professional Engineer (PE)
  • Experience with US codes and standards.
  • Demonstrated success independently delivering CFD studies from scoping through final report, including geometry preparation, meshing, solver setup, convergence assessment, post-processing, and engineering interpretation.
  • Ability to develop appropriate boundary conditions from design information and equipment performance data, and to explain the sensitivity of results to key assumptions.
  • Strong technical writing, visualization, and presentation skills, with the ability to communicate complex results to engineering teams, project managers, and clients.

Additional Information

Similar open jobs

Jobs in Washington, DC (3487)