Principal RF/DSP Engineer

AeroVironment, Inc.

Where
Leesburg, VA
Pay
$154K to $234K a year

Posted 2 months ago· Checked live at AeroVironment, Inc. 4 days ago

Stale: open 79 daysUp for more than two weeks. It may already be filled.

See how you score for this job

One sentence and your resume. We score it against what AeroVironment, Inc. asks for, line by line.

See my score
Is this job still open?
Yes. We checked it live on AeroVironment, Inc.'s own hiring page 4 days ago.
What is the job?
Worker Type Regular
What does it pay?
$154K to $234K a year, as the posting states.
Our verdict
Stale. Up for more than two weeks. It may already be filled.

What the job is

Worker Type

Regular

Job Description

AV is seeking a hands-on Principal RF/DSP Engineer to take on the hardest RF detection and classification problems in our Counter-UAS products.

What you'll do

  • Take ownership of our most difficult unfamiliar RF targets with no prior framing: generate hypotheses, rank them, and design the experiment plan that discriminates between them.
  • Analyze wideband complex-IQ recordings from known and unfamiliar RF systems.
  • Characterize signal bandwidth, timing, modulation, synchronization, channel access, frequency-hopping behavior, framing, coding, and other observable properties.
  • Design controlled experiments that isolate transmitter behavior and reveal waveform or protocol structure, and decide when a line of investigation should be redirected or abandoned.
  • Develop algorithms for burst detection, synchronization, demodulation, signal characterization, protocol recovery, classification, and tracking.
  • Design, implement, and own reusable signal-processing components — synchronization libraries, synthetic-waveform and impairment-injection frameworks, replay fixtures, and validation harnesses — used across the team.
  • Own and improve line-of-bearing performance: develop and refine array signal-processing algorithms for bearing estimation (e.g., correlative interferometry, subspace methods such as MUSIC, beamforming), and quantify accuracy against ground truth.
  • Diagnose and mitigate real-world DF error sources including array calibration drift, mutual coupling, channel phase/gain mismatch, multipath, platform and mast effects, and coherent-source conditions.
  • Design array calibration procedures and validate them in conducted, anechoic/open-range, and field settings.
  • Distinguish target signals from noise, interference, receiver artifacts, and benign emitters in dense RF environments.
  • Implement and optimize production DSP capabilities in modern C++.
  • Convert exploratory analysis into maintainable, observable, and computationally bounded production components.
  • Validate algorithms using synthetic, conducted, over-the-air, and field-recorded data, and lead field validation campaigns.
  • Measure detection probability, false-alarm rate, packet error rate, acquisition behavior, latency, and computational performance.
  • Diagnose failures involving CFO, sample-clock error, timing recovery, multipath, clipping, IQ imbalance, spectral inversion, dropped samples, and interference.
  • Serve as day-to-day technical lead for other signal-processing engineers: review their analysis, experiment designs, and code; de-risk their approaches; and step into stalled efforts and get them moving.
  • Identify emerging target classes and systemic bottlenecks, and recommend technical investments to leadership.
  • Work with RF, FPGA, embedded software, data science, test, and mission teams.
  • Document observations, assumptions, confidence levels, known limitations, and recommended next experiments.

Required Qualifications

  • BS or higher in Electrical Engineering, Computer Engineering, Applied Physics, or a related technical field.
  • Substantial professional experience developing RF, communications, radar, electronic-warfare, or related signal-processing systems.
  • Strong DSP and digital-communications fundamentals, including several of the following: Sampling and aliasing; Digital downconversion; FIR/IIR and multirate filtering; FFT and time-frequency analysis; Matched filtering; Detection and estimation; Carrier, phase, symbol-timing, and frame synchronization; Modulation and demodulation; Channel coding and error detection.
  • Demonstrated ability to independently investigate an unfamiliar signal or system using measurements and controlled experiments, from initial hypothesis through validated conclusion.
  • Experience analyzing real complex-IQ data—not only simulations or high-level system models.
  • Hands-on experience implementing, testing, and debugging DSP algorithms.
  • Proficiency writing production-quality C++ in a Linux environment.
  • Hands-on experience with direction finding and antenna-array signal processing: bearing estimation on real multichannel data (interferometric, beamforming, or subspace methods), array calibration, and an understanding of practical DF error sources such as mutual coupling, channel mismatch, and multipath.
  • Experience creating automated tests and replaying recorded data through algorithm pipelines.
  • Experience with collaborative source control and code review using Git or an equivalent system.
  • US Citizenship is required.

Preferred Qualifications

  • Track record of independently reverse-engineering an undocumented or partially documented wireless waveform or protocol through to a fielded or productized capability.
  • Demonstrated technical leadership of other engineers: reviewing designs and code, setting methodology, and raising team output while remaining hands-on.
  • Experience designing reusable DSP libraries, frameworks, or test infrastructure adopted by other engineers.
  • Experience with Software Defined Radios, RF laboratory equipment, and conducted or over-the-air testing.
  • Experience with frequency-hopping, spread-spectrum, OFDM, cellular, telemetry, command-and-control, or other modern communication systems.
  • Experience building detectors that operate in congested RF environments with measurable false-alarm requirements.
  • Experience with FPGA-based DSP, fixed-point implementation, hardware/software partitioning, or high-rate sample transport.
  • Experience optimizing real-time C++ DSP pipelines using profiling, SIMD, threading, bounded queues, and reusable buffers.
  • Experience generating synthetic waveforms and injecting controlled impairments such as noise, CFO, clock offset, fading, and interference.
  • RF antenna design experience: element or array design, simulation (e.g., HFSS, CST, FEKO), pattern and impedance measurement, or working directly with antenna engineers on array geometry and platform integration trades.
  • Deeper array-processing experience: wideband DF, DF on frequency-hopping or short-burst emitters, coherent multichannel receiver architectures, or emitter geolocation (TDOA/AOA fusion, multi-sensor triangulation).
  • Familiarity with statistical classification or machine learning applied to RF data.
  • Experience with Counter-UAS, electronic warfare, SIGINT, radar, or related mission systems.

The salary range for this role is

$153,500 - $234,250

AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills.

ITAR Requirement

This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment’s determination that it will be able to obtain an export license in a time frame consistent with AeroVironment’s business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements.

Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: http://www.avinc.com/myavbenefits.

We also encourage you to review our company website at http://www.avinc.com to learn more about us.

Principals only need apply. NO agencies please.