Quality NDT (VT) Inspector Submarines

Austal USA LLC

Where
Mobile, AL

Posted 27 days ago· Checked live at Austal USA LLC 4 days ago

Stale: open 27 daysUp for more than two weeks. It may already be filled.

See how you score for this job

One sentence and your resume. We score it against what Austal USA LLC asks for, line by line.

See my score
Is this job still open?
Yes. We checked it live on Austal USA LLC's own hiring page 4 days ago.
What is the job?
REPORTS TO: Quality Inspections Supervisor / Quality Inspection Foreman Performs VT inspections on completed welds IAW MDD-00948 (VT Structure).
What does it pay?
The posting doesn't say.
Our verdict
Stale. Up for more than two weeks. It may already be filled.

What the job is

REPORTS TO: Quality Inspections Supervisor / Quality Inspection Foreman

Performs VT inspections on completed welds IAW MDD-00948 (VT Structure).

Ability to use inspection tools to ensure tolerances are within written procedure and aren’t exceeded.

Ability to understand drawings to identify part locations and weld joint information.

Authorities / responsibilities

  • Performs VT inspections on completed welds IAW MDD-00948 (VT Structure).
  • Ability to use inspection tools to ensure tolerances are within written procedure and aren’t exceeded.
  • Ability to understand drawings to identify part locations and weld joint information.
  • Ability to understand and interpret information identified on the SWSS for each joint and correspond with correct drawings.
  • Consults with internal and external customers as necessary.
  • Provides guidance to production employees and Supervision for workmanship corrections required.
  • Shall document, accept or reject workmanship based upon contract acceptance criteria for inspections being performed.
  • Ensure all training qualifications are up to date in Cornerstone and in Personnel Qualification Standards (PQS).
  • Must obtain ERS access and sign off joint inspection status daily using EB supplied IGEL prior to end of shift. All joints must have correct kick code logged if joint is rejectable.
  • Ability to successfully pass required audits to maintain MDD-00948 certification.
  • Must be willing to work any shift.
  • Must be willing to work overtime as needed.
  • Complies with Austal’s employee handbook general guidelines, company procedures and policies.
  • Assist with training as needed.
  • This position description is not intended to be all-inclusive. Incumbents will perform other tasks as assigned.

Qualifications / knowledge / experience

  • Candidate must possess three – five (3-5) years welding, industrial, or Inspection experience and be able to become MDD-00948 certified in Visual Testing of completed welds (VT Structure) within three (3) months of employment. Time frame may be extended based on class and training scheduling availability.
  • Willingness to submit background check required. EB badge approval required.
  • MDD-00948 certification in Visual Testing of completed welds (VT Structure) is required and must be maintained. Suspension of certification to reviewed and path forward established. Failure to regain certification will result in disciplinary action up to and including termination.
  • Proven ability to perform simple math (add, subtract, multiply and divide) and measure using the metric / standard system required.
  • Basic understanding of quality principles required.
  • Ability and willingness to work irregular or extended work schedule as required.
  • Good mechanical aptitude required.
  • Ability to receive and carry out written and verbal instructions required.
  • Ability to work independently, prioritize tasks, work under pressure and be self-motivated required.
  • Strong organizational skills required.
  • Good oral and written communication skills required.
  • Willingness and ability to learn any new NDT methods and / or skills assigned by management.
  • Willingness and ability to increase understanding of the applicable standards and requirements for the job.
  • Other NDT experience is a plus and will be considered equivalent for preferred applicants.

LIAISES WITH: Austal Production Management / EB Counterpart

Physical requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites.

While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit.

Specific physical requirements include the following

Must have the ability to bend, squat, stoop, crawl, and kneel. Perform prolonged standing. Ability to turn head from side to side and about the vertical axis. Ability to turn body at the waist from side to side and about the vertical axis. Lift/push/pull 50lbs to 75lbs on an occasional basis. Lift/push/pull up to 20lbs on a frequent basis. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps). Ability to work at heights above 12’ while working from ladders, scaffolding and/or man lifts. Able to work at a variety of levels (ex. waist, eye, overhead). Demonstrate the ability to safely and appropriately use required tools and equipment. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles. Possess sufficient handgrip and coordination to carry and operate tools and equipment. Ability to utilize personal protective equipment (hard hat, safety glasses, steel- toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards. Ability to withstand cold and hot temperatures. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time. Able to respond to verbal and audible sounds/commands. Able to utilize adequate visual skills. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.